Universal Detectors

 

UDP-24 'Universal' Point of use Water Detector

  • This detector simply needs a 24 volt power source, and in the event of an alarm a volt-free contact is triggered, giving an alarm signal back to a BMS etc.
  • This detector does not require an i-Zone control panel.
  • For use within Plant rooms and other solid floor areas.
  • For detection of conductive water.
  • Manufactured from rust proof and hard wearing ABS plastic.
  • Gold plated detecting pins.
  • Two component design – keeping head and electronic module separate.
  • LED & internal alarm sounder in module to give local alarm indication.
  • Multiple types of protection covers are available to prevent mechanical damage.

Click here for Data Sheet

UDP-24
 

UDC-24 'Universal' Zone Detector Module

  • This detector simply needs a 24 volt power source, and in the event of an alarm a volt-free contact is triggered, giving an alarm signal back to a BMS etc.
  • This detector does not require an i-Zone control panel.
  • Zone detector module for connection to detecting cable
  • Manufactured from rust proof and hard wearing ABS plastic
  • LED & internal alarm sounder in module to give local alarm indication

Click here for Data Sheet

 

 

UDC-24
 

UDIN-24 'Universal' Point of use Infrared Detector

  • This detector simply needs a 24 volt power source, and in the event of an alarm a volt-free contact is triggered, giving an alarm signal back to a BMS etc.
  • This detector does not require an i-Zone control panel.
  • For use within Plant rooms and other solid floor areas
  • For the detection of oil, and all other non-conductive liquids
  • Manufactured from rust proof and hard wearing ABS plastic
  • Two component design – keeping head and electronic module separate
  • LED & internal alarm sounder in module to give local alarm indication
  • Multiple types of protection covers are available to prevent mechanical damage.

Click here for Data Sheet

UDIN-24
 

UDOF-24 'Universal' Overflow Detector 

  • This detector simply needs a 24 volt power source, and in the event of an alarm a volt-free contact is triggered, giving an alarm signal back to a BMS etc.
  • This detector does not require an i-Zone control panel.
  • For detection of water within an overflow pipe
  • ¾” BSP threaded connector for insertion into a tee piece
  • Manufactured from rust proof and hard wearing ABS plastic
  • For connection to i-Zone or i-Zone Touch control panels
  • Two component design – keeping head and electronic module separate
  • LED & internal alarm sounder in module to give local alarm indication

Click here for Data Sheet

ODOF-24
 

UDF-24 'Universal' Float Detector

  • This detector simply needs a 24 volt power source, and in the event of an alarm a volt-free contact is triggered, giving an alarm signal back to a BMS etc.
  • This detector does not require an i-Zone control panel.
  • For use within Sumps, Plant rooms, & water tanks
  • Can be set to alarm on the rise or fall of water.
  • Manufactured from rust proof and hard wearing ABS plastic
  • Float switch held in place by sprung clip.
  • Two component design – keeping head and electronic module separate
  • LED & internal alarm sounder in module to give local alarm indication
  • For connection to i-Zone or i-Zone Touch control panels

Click here for Data Sheet

UDF-24
 

Newsletter Sign Up