CDBi-485 Zone Detector Module

  • Zone detector module for connection to detecting cable.
  • Manufactured from rust proof and hard wearing ABS plastic.
  • LED & internal alarm sounder in module to give local alarm indication.
  • For connection to an i-Zone Mini control panel.

CD-X Detecting Cable

  • Detecting cable for all models of control panel.
  • Constructed from hard wearing Helegaine 66 nylon self extinguishing sleeves giving increased protection against dust & conductive contamination.
  • Locking plugs and sockets for a secure connection.
  • Available in modular lengths of 1, 2, 5, & 10 metres.
  • For connection to Detector Modules and Locating equipment.

FLi-485 Float Detector

  • For use within Sumps, Plant rooms, & Water tanks.
  • Can be set to alarm on the rise or fall of water.
  • Manufactured from rust proof and hard wearing ABS plastic.
  • Float switch held in place by sprung clip.
  • Two component design – keeping head and electronic module separate.
  • LED & internal alarm sounder in module to give local alarm indication.
  • For connection to an i-Zone Mini control panel.

OFDi-485 Overflow Detector

  • For detection of water within an overflow pipe.
  • ¾” BSP threaded connector for insertion into a tee piece.
  • Manufactured from rust proof and hard wearing ABS plastic.
  • Two component design – keeping head and electronic module separate.
  • LED & internal alarm sounder in module to give local alarm indication.
  • For connection to an i-Zone Mini control panel.

STDi-485 Point of use Water Detector

  • For use within Plant rooms and other solid floor areas.
  • For detection of conductive water.
  • Manufactured from rust proof and hard wearing ABS plastic.
  • Gold plated detecting pins.
  • Two component design – keeping head and electronic module separate.
  • LED & internal alarm sounder in module to give local alarm indication.
  • Multiple types of protection covers are available to prevent mechanical damage.
  • For connection to an i-Zone Mini control panel.

IRDi-485 Point of use Infrared Detector

  • For use within Plant rooms and other solid floor areas.
  • For detection of Oil and other non-conductive liquids.
  • Manufactured from rust proof and hard wearing ABS plastic.
  • Two component design – keeping head and electronic module separate.
  • LED & internal alarm sounder in module to give local alarm indication.
  • Multiple types of protection covers are available to prevent mechanical damage.
  • For connection to an i-Zone Mini control panel.